Description :

Swing cylinders are pull type cylinders. The piston rotates by 90º during the swing stroke, followed by straight clamping stroke due to the internal cam.

Application :

The clamping strap rotates by 90º while clamping and declamping. Due to the swing action, loading and unloading of the job is very easy. In the unclamped position, the workpiece area is free from the strap.

Versions :

Type of Cylinder

• SW - Single Acting (Spring Return)
• DSW - Double Acting

Mounting style

• TM - Top Mounting
• BM - Bottom mounting

Swing direction (While clamping & looking from rod side)

• CW - Clockwise
• CCW - Counter clockwise

Specifications :

• Maximum oil pressure - 200 bar.
• Minimum oil pressure - 30 bar.

Notes :

• Single acting cylinders are suitable with Hydropneumatic Intensifier and should not be used with hydraulic power unit ‘B’.
• Double acting cylinders are suitable with hydraulic power unit ‘B’..
• Clamp the job in the straight clamping stroke only.
• Do not exceed the standard strap length.
• Adjust the oil flow rate in such a way so that the total clamping time will be between one to three seconds.
• For height adjustment, either use a spacer at the mounting plate or adjust the clamping bolt on the strap. (fig. below )
• For horizontal mounting of single acting cylinders, weight of the strap should assist the decamping swing stroke.
• For single acting, spring return cylinder, a breather is provided. It should be protected from cutting liquids and coolants.
• Use only meter in circuit.
• Assemble the strap when cylinder is in clamp condition without putting work piece.
• Angular tolerance ± 3°.
• Strap has to be ordered separately.
• For ordering the seal kit, add the prefix "S" to the part number.
• For Non-standard cylinder requirements, Please contact sales@hypowerclamps.com.

Dimensional details :

Application Example :